disconnect the wires starting with the negative post first. there is a clamp holding the battery down at the base of the battery in the middle of the long side. loosen the bolt and tilt the battery...
Use a small screw driver to pry the tiny pin that holds it in place with the shaft. The pin looks like a paperclip and is wraped around the cylinder of the handle.
Open both front doors and remove everything between the front seat and the firewall, no joke. I recommend purchasing a shop manual for that vehicle if you are going to do that job yourself. It will...
first you position the tilt steering all the way down, then take some silicone lube and place it over/on the rubber that covers the gear shifter where it meets the steering columb. Next gently pry...