to start off you have to pull off the dash trim around the raideo and the dash. once you do that their are 2 clips one on each side of the raideo you just push them down and pull and out comes the raideo.
put the parking brake in, then put the truck in 1st gear pop the dash cover off and then remove bolts from stereo.
FIRST YOU HAVE TO REMOVE THE FACE OF YOUR dash IT JUST POPS OFF... THEN U CAN SEE THE RADIO JUST UNSCREW THEN PULL OUT THEN UNPLUG WIRE HARNESS.
u have to go to the shop and buy it and pay the shop to install it
you have to remove the front console. take out the ash trey. and remove all the screws around the trim of the area of the stereo and then slid the stereo out and un hook all connections. if you get a new stereo it should have more detailed instructions
No.
you sell the truck
try www.haynes.com
I remove my stereo from my GMC Truck and now my lights don't work
no sorry
cut seals and gently remove
IF it is a 1/2 ton truck then a 4l60E belongs in it from the factory. IF it is a 3/4 ton truck then a 4l80E was factory in it.
remove the bed of the truck.....