If your problem is removal of the axle hub caps (eg) Heritage Springer FLSTS, they screw off. They should be only just tighter than hand tight. If not, use a set of pipe grips with a rubber wristband (You know the ones) ...or a rubber oil filter strap... around the cap to prevent marking the finish.
Raise the front of the bike of course....
Once they're removed along with the tear drop fender trim plates, I found it best to remove the front calliper via the two allen screws and securing it out of the way, tie it to your handlebar or something. On the right hand side of the axle (Looking from the rear of the bike) is the axle nut, secured by a split pin, remove that and the nut (15/16th inch spanner and socket) then using a rubber hammer, knock the axle through.
Make sure you note where the spacers etc fit on removal, then drop the wheel out. If in doubt, use a phone camera to take pics so you don't forget.
Re-assembly can be awkward single handed so get a mate to help or grow an extra arm. Re-grease the bearings and axle before re-assembly if required. Torque settings are per your user manual of course :)
Hope this helps mate,
Moley
The Harley Davidson Springer is a softail motorcycle that has a springer front end. The springer has an extra spring loaded shaft that helps for the front wheel's suspension.
It's a softail with a springer front end installed. The springer front end has an extra spring loaded/shock assisted shaft that the axle mounts to for the front wheel's suspension. Some people add springer front ends to other models as well.
how do you remove front tire on 02 softail springer
heritage classic or heritage softail classic is the same..only bike different is the heritage springer which has the springs on the front under headlamp
To remove the seat on a Harley Davidson Road King, you must unscrew the Philips head screw that is directly behind the seat. Then, slide the seat and unfasten the hook at the front of it.
Front fenders for Harley Davidsons, as well as other parts, can be bought directly from Harley Davidson dealers or from from Harley Davidson's website. You can also find them on major online retailers like Amazon or eBay.
Harley front end components and accessories can be purchased from online websites such as harley-davidson and phatperformanceparts. They both sell many different components and parts for Harley-davidson bikes.
1928
stamped on the front down tube.
Not a chance. The front wheel has no way to attach the rear rotor.
It should be one inch.
You can purchase front end parts for a harley davidson motorcycle from their official website's store. Alternatively you could purchase them online from the salvagebikesauction website.