Answers.com > Wiki Answers > Categories > Cars & Vehicles > Auto Parts and Repairs > Fuel and Engines > Fuel and Fuel Intake > Fuel Filters > How do you remove fuel line quick connect retaining clips?

How do you remove fuel line quick connect retaining clips?

In: Fuel Filters [Edit categories]

Answer:

what you do is EASILY pull the hose and the retaining clip together ( like you are putting

the hose back on the clip) when the hose is as far as it will go you have to squeeze the

2 white or grey retaining clip together. at the same time slowly slide the hose off. Make

sure the clips are in good shape b/c if your changing the fuel pump you have to reuse

them clips.

Let me know if this helps you
JLamond219@Yahoo.com

First answer by JLamond219. Last edit by JLamond219. Contributor trust: 15 [recommend contributor ]. Question popularity: 2 [recommend question].

[report abuse]

Can you answer these Fuel Filters questions?

	Why you should not waste fuel?	Answer it!
	How obtain high pass filter using Gaussian?	Answer it!
	How do you remove the oil filter from a Kia Sportage?	Answer it!
	Why are fuel cells useful to spacecrafts?	Answer it!

Relevant answers:

How do you remove the quick connect on the transmission line?
there is a tool yo do it or you can use a very small screwdriver to pull the retaining wire out. be carefull not to bend it so much that it permanitly distorts. then the line just pulls out. all the...
How do you remove the quick connect on the transmission line of a Chevy s10?
There is a plastic fitting or tool that goes around the line and you push into the fitting to release it. Push it in and pull out the line. You can buy a set of 5 for around $8 to $10 U.S.
Does ford have a tool to remove the quick connect clips?
There are a few different styles of "quick connect" clips used on Ford products. Transmissions lines, A/C lines, some fuel lines just to name a few. The best bet is to check at the local auto parts...
How do you remove air from your fuel line?
loosen fuel line at injector or delivery rail and crank engine until it begins to fire, then shut off, tighten injector or fuel rail connection, start it up and be on your way Some diesel engines...
How do you remove the fuel lines from the fuel filter on a 2001 Mustang?
there is a tool that you buy that fits around the tubing that you push back towards the fuel line and then it releases. This is the same way most ford vehicles are designed.