How do you remove ignition switch 1966 chevy truck?

As you look at the switch there should be a ring with three notches or groves, this is the nut that holds the switch in. If you are careful, you can use a regular screwdriver in one of the groves and tap it with a hammer to break the nut loose. You should then be able to remove the nut by hand and push the switch through the dash. Reach under the dash and pull the switch down so you can see the wires on the back. I am not 100% sure if it is a single plug or if there are several wires (although I believe it will be several seperate wires). If you are putting in a new switch, make sure you have the new, and correct switch for the next step, remove the wires one at a time and reinstall them on the new switch. Once you are done with this, just put the switch back in and you're done.

Hayden

First answer by Hwe 2007. Last edit by Hwe 2007. Contributor trust: 9 [recommend contributor]. Question popularity: 4 [recommend question]