Answers.com > Wiki Answers > Categories > Cars & Vehicles > European Cars > Rover > Rover 75 Series > How do you remove inlet manifold on rover v6?

How do you remove inlet manifold on rover v6?

In: Rover 75 Series [Edit categories]

Answer:

Its held by 6 screws, 4 are visible the other two (8mm) are located at the back of the engine, very hard to find so use a mirror... Good luck,

IB (Netherlands)

First answer by ID1052944963. Last edit by ID1052944963. Question popularity: 1 [recommend question].

[report abuse]

Can you answer these Rover 75 Series questions?

	Is it normal to have puddle under car with climate control?	Answer it!
	How do you know if the fan relay is faulty?	Answer it!
	What links the gear stick to the gear box?	Answer it!
	How do you reset brake warning light after service?	Answer it!
	How do you unfreeze an engine radiator?	Answer it!

How do you remove a inlet manifold on a matiz?
everyone says it's very fiddly. replacement costs 200+200 labour
Will a upper inlet manifold off a rover 75 2.0 v6 fit a rover 75 2.5 v6?
yes
How do you remove a 1999 vw v5 inlet manifold?
Hi you need to remove the front bumper, grill this gives you some room at the frontundo the two outer bolts at the front manifold 5mm allen keys then move water pipe to the side this then allows room...
How do you tell the Symptoms of a inlet manifold leak V6?
Car is difficult to start, and will not idle. Whistling or sucking sound may be heard, One spark plug may be burning incorrectly. Answer . A stumbling engine, poor idling, possibly having to keep...
How do you remove a radiator in a rover 400?
Depending on the model, you have to first take two top brackerts holding rad (13mm bolts from memory) disconnect hoses, unbolt rad fan (couple of 8mm nuts, hard to get to bottom ones) if there is air...