answersLogoWhite

0


Best Answer

There is one Phillips head screw on the top of the asseembly, close to the headlight. Remove the screw, and there will be a ball and socket connection holding the assembly in place. Gently pull the top of the assembly toward the front of the truck. Then use a long screwdriver to gently pry the bottom toward the front of the truck. Keep alternating between the top and bottom, prying it a little at a time. Eventually, the unit will pop out.

User Avatar

Wiki User

12y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you remove or replace the side front light bulb on a Isuzu Trooper?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you change the rotors in the front on a 1994 Isuzu Trooper how do you remove the front hubs?

wear gloves, bearings all come out. then you have to remove the sensor off the back of it. along with 6 17mm bolts. How do you change the rotors in the front on a 1998 Isuzu Trooper


How do you replace the shocks on a 1997 Isuzu Rodeo?

How do I remove the front shock bottle pin of my Isuzu rodeo 2000


Where is the thermostat located on a 1996 isuzu trooper?

On top in front of engine


Where is the thermostat located on a 1998 Isuzu Trooper?

The thermostat on a 1998 Isuzu Trooper is located on the front of the motor. It is in the top radiator hose where it connects to the motor. To access the thermostat, the hose needs to be disconnected from the motor.


You are leaking oil on the front passenger side where could it be coming from Isuzu Trooper 1992?

my 1995 Trooper had same problem it was the crankshaft position sensor located on the middle passenger side of the motor. I will remove the passenger side front tire and it is behind the shock, tight fit but can be done.


Where is the oil filter on a 1992 Isuzu trooper?

passenger side of motor, top, in front of fire wall


Firing order 99 Isuzu trooper 3.5l?

The firing order for a 99 Isuzu Trooper 3.5l is 1, 2, 3, 4, 5, 6. The number one cylinder is on the left side in the front as you are facing the car.


1990 4-cylinder Isuzu trooper how many seats?

you have two seats in the front, and a bench seat in the back


How do you clean 2000 Isuzu trooper 30 diesel front brake calipers to stop them from sticking and prevent the hubs from getting very hot?

Cleaning will not help. The piston is going cocked in the bore. Rebuild or replace.


How do you remove the front tires from Isuzu Rodeo?

remove the six lug nuts


How do you change the front brake discs on a 2000 Isuzu Trooper?

I believe, you have to remove the caliper and bracket. Then remove the axle nut. All the bearings will come off. A very messy project. They are not just knock off rotors like most cars.


Where is the crankshaft sensor on a 1994 Isuzu Trooper?

Crankshaft sensor on a 1994 Trooper is located behind the passenger side motor mount near the bottom of the engine. If you look behind the front passenger wheel and behind the suspension support, your can see the sensor and wire. It is a tight fit to remove it.