You will have to remove the rear end plate off of the back of the rear end. Then turn the carrier until you see a big silver pin that goes through the spider gears. Those will be 4 small gears in the rear end carrier. If you look at the right side of the carrier were the pin goes through it you will see a small bolt head, That bolt goes through the carrier and holds the pin in place. Remove that bolt then reach up in the rear end housing and push the pin towards you until it comes out. ( DO NOT TURN ANYTHING AFTER YOU REMOVE THE PIN) are the spider gears will fall out.
Now get someone to push the axel in while you are looking at the 4 small gears in the housing, when they push the axel in a C-clip will fall off the end of the axel and into the rear end, You will see it fall out. Then just pull the axel out.
When you put the axel back in, push it all the way in then slide the c-clip over the end of the axel and then pull out on axel and that will hold the clip in place until you put the big long pin back in the carrier. I hope you understand, just watch what you are doing. GOOD LUCK.
4 wheel drive does not work 1989 chevy half ton pick up silverado
Front or rear, remove wheel, remove caliper, remove caliper bracket, remove rotor.
The wheels on a 1998 Chevy Silverado are 288 x 288. The first GMT800 Silverado/ Sierra were released in 1998 as 1999 models. The Chevy Silverado is available with either rear wheel drive or four wheel drive.
08 Chevy silverado
Most Minivans are front wheel drive and a 97 Chevy Silverado's are rear wheel drive, you do the math.
The clutch fan on a 2004 Chevy Silverado is removed by loosening the alternator bracket and pulling the drive belt. The fan's retaining bolts can then be removed and pulled from the engine.
YES.
4 door Chevy Silverado
Yes, he does. Kevin Harvick is the team owner of the #2 Chevy Silverado and he drives it part time in the Camping World Truck Series.
Yes it will bolt right up.
NO, The frames are made different.
2007chevy silverado 1500 .6.0 engine ;four weel drive