You just have to grab with a pliers and pull it out. You will have to twist and wiggle to break the rust though.
The factory puts the shield there for a reason.
Remove the spark plug wires from the spark plugs, use an extension for your Allen wrench, and use a spark plug socket to remove the spark plug.
You have to remove them and inspect.You have to remove them and inspect.
Disconnect the battery, remove the spark plug cables and covers, and remove the old spark plugs. Next, put in the new spark plugs, attach the spark plug cables and covers, and connect the car battery.
use your hands.
Turn it counter-clockwise
They are under the 6 ignition coils. There is a coil for each spark plug. You have to remove the coils, and then remove the plugs.
You have to remove the intake plenum. It just unbolts.
To change spark plugs on a 5.9 2002 Dodge Ram 1500, locate the old spark plugs. These are located at the end of the 8 wires inside the vehicle's bonnet. Remove the old spark plugs and replace with new.
They are under the coils. You have to remove the coils to access.
Disconnect the battery, remove the cables and boot covers, and remove the old spark plugs. Next, properly dispose of the spark plug, put in the new spark plug, attach the boot cover and wires, and connect the battery.
there are no wires. each spark plug has it's own "coil on top" remove the coil by pulling straight up . then remove and replace the spark plug. That wrong ther are wires on the 3.5 and it,s not easy you need to remove the intake manafold to remove & run new wires