answersLogoWhite

0


Best Answer

First, you should know that the television picture is AM or amplitude modulated, meaning that the picture is subject to "static" noise from lightning and other sources of external electrical noise. However, the television sound is FM or frequency modulated and is mostly immune to static or noise from OUTSIDE sources such as motor switching or fluorescent lights and lightning. So if you are experiencing "static" on your television sound it is probably from an internal condition, inside the television itself. Depending on the type of "static", the cause could be the audio amplifier inside the television malfunctioning or even breaking down. A qualified repair person could fix this, although it may cost more than the television is worth. Also, the slide-on wires to the speaker terminals could be dirty. These can be cleaned by an abrasive like scotch brite. Check all speaker connections if you can safely reach them with the television unplugged from power.

User Avatar

Wiki User

18y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you remove static from a television speaker?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you remove static from my satellite TV picture?

If the picture is "snowy" you have the TV on the wrong station.


Why can static electricity not to be used to run a television?

static electricity is static electricity


How does a speaker generate sound?

Speakers generate sound by electricity. have you ever heard that static on your tv headphones? that's the transmitter trying to connect to the tv. The elecricity travels to the speakers and 'tells' them what to do. it then emits your average sound.


How do you hook up dell w3000 speakers to TV?

Remove the Dell back cover from LCD TV to expose the Speaker connectorTurn off the power to the LCD TVDisconnect the power cordConnect the speaker wire with the proper "left" and "right" indicationConnect the red wire to the "+" polarityConnect the black wire to the "-" polarityUsing a screwdriver, remove the speaker pedestal screws.Connect the speaker to the LCD TV using the provided speaker mounting bracket (as shown above).Thumb screw the bracket to the back of the LCD TV and the Speaker. NOTICE - Do not connect the thumb screw too tightly as it could cause damage to the speakers and LCD TV.When relocating the LCD TV, do not carry the LCD TV by the speakers as this could potentially damage both the speakers and LCD TV.


When was Static Television created?

Static Television was created on 2006-10-16.


How to remove magnet from a speaker?

To remove a magnet in a speaker, first detach the grill in the front of the speaker, second unscrew the speaker after that remove the speaker from the cabinet and cut the speaker cone. Lastly, gently discard the magnet from the speaker cone.


Will switching to Samsung TVs prevent static?

Most likely changing the brand of you TV would not improve your static problem, as static generally isn't a problem caused by the TV itself. You should check all you connections to the TV and possibly contact you cable provider.


Who makes element led television?

static


Can you connect a radio speaker to a tv?

If this is a raw speaker without the radio electronics, it is not possible unless your TV has a speaker output (usually a push-in red and black bare wire connector).


How do you remove speakers 2007 model mustang?

Door Speakers: * Remove the door trim panel * Remove the speaker mounting screws * Pull out the speaker and disconnect the electrical connector from the speaker and remove the speaker Door Subwoofers: * Remove the subwoofer grille trim panel * Remove the door trim panel * Remove the 8 mounting screws from the front side of the subwoofer * Remove the single subwoofer retaining screw from the backside of the subwoofer enclosure * Pull out the subwoofer,disconnect the electrical connector and remove the subwoofer Quarter Panel Speakers: * Remove the quarter panel trim * Remove the 4 speaker mounting screws * Pull out the speaker,disconnect the electrical connector and remove the speaker Parcel Shelf Speakers: * Working from inside the trunk area,disconnect the speaker electrical connector * Remove the parcel shelf * Remove the speaker mounting screws and remove the speaker


How do you remove the rear view mirror on a 2000 mustang conv?

Remove speaker grill, remove screw holding speaker, screws to the mirror are behind speaker


What are some good examples of anti static products?

If someone wishes to remove static, there are many examples of good anti static products. Static-A-Way is a detergent that removes static from clothes when washed. Grounding wrist bands remove static when working on computers.