best thing to do if you want to takle this project yourself is to first spend about $30.00 and get a haynes manuel on this truck. If you are mechanicly inclined you'll do fine. Just follow the book...
Answer.
If it is the same as a 2000/2001 -
You will need a "Torx/Star" drill bit or driver to remover these screws...
(STEP1-)Open drivers door
(STEP2-)Use flathead screwdriver to pop-off...
Its a big job. Takes about 5 hours or so. Start with the passenger side, all the little small screws, drop the steering, and then remove all the screws on that side. There are some screws hidden on...