You need 3/8 hex head to unbolt the door and you need to pop off the top of the black unit in the door jam. there's a bolt. just unbolt that and the wiring is unattached.
The horn relay for a 1998 Sable is on the back of the distribution block. The block is under the dash on the drivers side.
In a 1998 Mercury Sable : The transaxle is the transmission on your front wheel drive Mercury Sable it is located in the engine compartment , on the drivers side , bolted to the engine
The transmission ( or in the case of your front wheel drive 1998 Mercury Sable , the " transaxle " ) is located in the engine compartment , on the drivers side , bolted to the engine
Check fuses Check wiring harness at transmission for corrosion or loose wiring
On a 1998 Mercury Sable : The fuse box is under the drivers side of the dash , to the left of the brake pedal ( it has a cover on it ) Also , the Power Distribution Box ( which is " live " ) is located in the front of the engine compartment , near the battery
Open the drivers door and look at the latch pillar , there will be a sticker showing the tire size on the vehicle from the factory
Original Equipment Tire is 205/65-15 which should be listed on the drivers door post.
disconnect wiring harness, mark hinges, remove bolts securing hinges to body.
1999 mercury sable horn replacement
To remove a 1998 Nissan Sentra Transmission, you first need to locate all of the bolts. From there, you will remove the bolts. Undo any wiring or tubing that goes into the transmission. From there, it can be taken out.
Disconnect the 98 LeSabre battery. Remove the alternator belt. Remove the alternator wiring. unbolt the alternator, remove it, and bolt the new one on. Reconnect the wiring, but the belt on, then reconnect the battery.
Begin by removing the retaining ring at the top of your 1998 BMW ignition switch. The ignition switch will slide out. Remove the wiring harness.