 |
How do you remove the front left inner door panel from a 1998 Mercury Sable?In: Mercury Sable |
[Edit] |
Answer
The door panel is simply held on by some plastic clips that pop in or out of place. Remove the two black screws that hold on the panel (one on the left edge, one on the right edge. Then remove the screw at the bottom of the place where your fingers go when you close the dorr from the inside, then remove the piece of plastic trim that goes around the inside door handle. This pops out from the top of the trim piece, not the bottom. A small flathead screwdriver is all that is needed to pry up the top portion of the trim piece.
After the three screws and th trim piece is removed, you can pull gently from one of the lower corners to release the first plastic snap, just work your way around the panel till all the clips have been released.
The electrical connectors come off by pushing the small button on the top of the electrical connector then pulling on the connector to remove it from the base while pushing the button down.
First answer by ID972747513. Last edit by ID972747513. Question popularity: 83 [recommend question]
Answers.com > Wiki Answers > Categories > Cars and Vehicles > American Cars > Mercury > Mercury Sable > How do you remove the front left inner door panel from a 1998 Mercury Sable?
Our contributors said this page should be displayed for the questions below. (Where do these come from ) |
| If any of these are not a genuine rephrasing of the question, please help out and edit these alternates. |
