Answers.com > Wiki Answers > Categories > Cars & Vehicles > American Cars > Chevrolet > Chevy Malibu > How do you remove the ignition switch in a 1979 Chevy Malibu?

How do you remove the ignition switch in a 1979 Chevy Malibu?

In: Chevy Malibu [Edit categories]

Answer:

Answer

the ignition lock cylinder is located on the upper right side of the steering column.the ignition switch is inaccessable unless the steering column is lowered.so the column must be lowered carefully and supported to prevent damage. remove lock cylinder-(note:pull actuating rod for switch up until a solid stop is felt,then push it down one detent to lock position) remove two switch screws and assembly.when replacing switch make sure switch and lock are in lock posistion.

First answer by ID0000000000. Last edit by ID0000000000. Question popularity: 92 [recommend question].

[report abuse]

Can you answer these Chevy Malibu questions?

	What does the oil drain plug look like?	Answer it!
	How much coolant do you put in a Chevy Malibu and what coolant should i buy?	Answer it!

Relevant answers:

Where is the ignition switch located in a Chevy Malibu?
The Malibu has been in production on and off for Fifty years, What year are you asking about?
How do you remove the ignition switch on a Chevy?
It depends on what year. For 72 and earlier (in the dash) follow this. 1. Turn ignition switch to off position and leave the key in the switch. 2. Disconnect the battery. 3. Take a small dia....
How do you remove the ignition key switch from a 1999 Chevy Malibu without the key?
I'd call a locksmith. That could require drilling. Not easy for even a mechanical type person.
How do you change and ignition switch in dashboard on 1998 Chevy Malibu?
first remove the dash trim, you can go to any auto parts store and buy a trim removal tool if need be. you can also remove trim by pulling straight out, be carefull not to break it. after removing...
How do you change a ignition switch in a 1997 Chevy Malibu?
try going to the parts store and buying a chilton manual for the make and model of your vehicle. It has diagrams and step by step instructions. It will cost somewhere around 30 dollars of so and if...