pull the cup holder off by prying it from the bottom, remove the 10mm screw found underneath it, then with the door fully open, pry the panel with a large screwdriver starting from the bottom and working your way up. once the fasteners are pulled away from the door raise up the panel a few inches and pull it out toward the front.
The same question for a 99 Sienna was answered on this site by referencing www.findonefindall.com/toyota-sienna/ The price quoted for the handle way $65.
pull the handle
"How do you replace a factory antenna on a 2002 Toyota Sienna?" I am talking about the whole assembly. Thanks
The passenger side mirror on a 2001 Toyota Sienna is mounted by screws. To replace the mirror remove the mounting screws and unplug the wire clip.
Remove engine and transaxle assembly
Yes it does
It should be under the passenger side sliding door. Tools to lower the spare are supposed to be in the right side trunk tool compartment. All information are in the operator's manual.
If the tail light on the passenger side of a 1999 Toyota Sienna CE is out, it is most likely a blown bulb. The bulbs can be purchased at any auto parts store.
The Poer Sliding module is loctaed in the Right rear quarter panel. You will have to remove the trim to access it.
so they know that the airbag is off.
Visit siennaclub.org for detailed information.
Drivers side 26'' Passenger side 19''