answersLogoWhite

0


Best Answer

I need help on how to remove my powersteering pump? You must first remove the Power Steering pump pulley. Most part stores have a tool loaner program so you can borrow the puller and and return it and get your money back. After the pulley is removed there are 3 bolts holding the power steering pump to the bracket. Pull those and the long bracket that is on the back of the pump and connects to the exhaust manifold and alternator and the pump should slide out. This information is for a 5.7L engine, but I believe it is close to the same for a 4.3L.

User Avatar

Wiki User

16y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

15y ago

i dont know why are you asking me......kidding but ireally dont know but youcan look it up n Google

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you remove the power steering pump alternator bracket on a 1995 Chevy Silverado?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Art & Architecture

How to change alternator on a 1997 Chevy Lumina?

on the car its fairly simple disconnect battery. use 3\8 drive ratchet put in the auto tensioner arm for serpentine belt and lift up remove belt. remove bolts going to wish bone mounts at front of engine. tilt engine forward. disconnect wire harness to alternator{should be 10mm} remove bolt from bracket at bottom of alternator. tilt alternator up and remove bolt from bottom back. hope this helped.


How do you Replace alternator in a 2001 vw golf gti?

Remove the alternator belt from your 2000 Chevrolet Monte Carlo alternator. Remove the wiring harness from the alternator. Remove the alternator retaining bolts. Reverse the process to install the new alternator.


How do you replace the alternator on a Ford Escape?

first remove positive battery cable from battery. Then remove front passenger tire, then remove strut and hub, then remove cv axle undo two mounting bolts from bottom, once this is done access to three mounting bracket bolts. to remove mounting bracket then slide alternator btwn frame and engine and replace, have fun this takes avg 4-5 hours! i found out that if you take out the oil filter u can get to the bolts with easy access. it beats taking of the drive shaft. once the bracket is off you can take it out from the top. it would be easier if you unbolt the tension assembly. it took me about 2 hours to do all this and put back together. $20 extra bucks for the oil beats the extra hours i would have to put into working on the car. have fun :) OOOOOOOORRRRRRRRR,,,,,,,, It is possible to remove it from the top of the engine. I know this becasue i just accomplished this in under 3 hours. Start to finish with a coffee break in between. If you want to know exactly how i did it feel free to email me atomic_aura@hotmail.com 03 ford escape v6


How to replace an alternator in a 1997 Honda civic?

you must lift up the civic with the driver side tire off then u gotta get the axle loose u might need to remove the whole left side suspention to free up the axle then u gotta get the alternator loose and remove it and then reverse. / The alternator can be removed by lifting front of car and driver side suspention lowered so that tire is just touching, then the alternator will have clearance to slide by driver side axle from under vehicle without removing any suspention. My son and I just did this so it should work on yours. (Aug 21, 2008)


Where is the alternator and how do you replace it on a 1999 Nissan Maxima?

You can find the alternator on the front, right hand side, of your engine. Remove the cables from the alternator. Remove the belt. Remove the retaining nuts. Reverse the process to install the new alternator.

Related questions

How do you remove an alternator bracket on a 1998 Dodge Caravan 3.3 Liter engine?

remove belt, remove alternator plugs, then bolts. pull out alternator. then undo bolts for bracket and remove.


How to replace the alternator on a 1993 Dodge Grand Caravan fully loaded?

3.3L and 3.8L Engines The 3.3L and 3.8L engines were equipped with the Nippondenso alternators. 1. Disconnect the negative battery cable. 2. Remove the alternator drive belt, by relieving the tension on the dynamic tensioner. 3. Loosen the nut on the support bracket at the exhaust manifold, do not remove it. 4. Remove the alternator tensioner/power steering bracket bolt. 5. Remove the tensioner stud nut and remove the tensioner. 6. Remove the alternator mounting bolts. 7. Remove the power steering reservoir from the mounting bracket, do not disconnect the hoses, and position it out of the way. 8. Remove the alternator support bracket bolts. Remove the intake plenum to alternator bracket bolt and remove the alternator support bracket from the engine. 9. Remove the alternator from the engine and disconnect the electrical leads. To install: 10. Install the alternator in position on the engine and connect the electrical leads. 11. Install the alternator support bracket, tighten the retaining bolts to 40 ft. lbs. (54 Nm). 12. Install the power steering reservoir on the mounting bracket. 13. Install the alternator mounting bolts, tighten the bolts to 40 ft. lbs. (54 Nm). 14. Install the tensioner and tensioner mounting stud. Install the retaining nut on the exhaust manifold. 15. Install the alternator belt, insert a 1/2 in. extension into the square hole in the tensioner and turn the tensioner. Tighten the tensioner bolt. 16. Connect the negative battery cable.


Where is the alternator on a 1986 BMW 325?

The alternator on this car is mounted at the front of the motor on the driver's side. It is above the power steering pump. To remove it it's best to remove the MAF sensor for easy access to the bracket.


How do you remove the fan clutch on a 2004 silverado?

The clutch fan on a 2004 Chevy Silverado is removed by loosening the alternator bracket and pulling the drive belt. The fan's retaining bolts can then be removed and pulled from the engine.


How to replace alternator bracket gasket on 2005 BMW 545i?

remove the alternator, remove mounting bolts for steering pump and position aside, remove upper engine mount bolt/nut, support engine with sling, remove the upper engine mount bracket, then finally accessory bracket. whole job with proper tools and equipment takes approx. 5 hours to do. I would not attempt to do this as a driveway repair.


How do you remove the alternator belt from a 1997 Plymouth Neon espresso?

first you need to jack up your car and put it on jack stands, then remove the passenger side wheel, then loosen the two bolts on the back of the power steering pump and the pivot bolt so you can remove the accessory drive belt. Then you can loosen the two bolts on the front of the alternator, then if you look at the alternator through the wheel well on the left side of the alternator there is a bracket, on the backside of the bracket there is an adjuster bolt loosen it and then you can remove the alternator belt.


How do you replace the water pump on a 1988 VW Passat 1.8L Petrol Estate?

You need to remove the accesory bracket from the engine. Powere steering pump, ac compressor, alternator and then the bracket. Then you can get the pump out. Not a lot of fun.


How do you change timing belt on 1996 Chevrolet Cavalier?

First you should pull the belt off of the pulleys and out of the engine bay. Next, remove the power steering mount without disconnecting it. Next, detach the alternator wires and remove the alternator bracket.


How do you remove alternator for 1997 silverado 1500?

f5Sxs7 rexgepkqyroi


How do you replace the alternator on a 1999 Mitsubishi Galant V6?

Remove the neg. lead from the battery Remove the clamp that connects the power steering pump pressure hose to the valve cover(top of engine where you pour oil) Push pressure hose to the side Loosen the bolt attached to the alternator which will allow you to relieve tension to the drivebelt Push the alternator forward toward the engine block Remove the oil dipstick tube bracket and dipstick from the engine(held on by a top mounted bolt on the dipstick) Remove positive electrical connector from alternator Remove remaining alternator mounting bolts and pull out alternator Install in reverse of removalMAKE SURE NEW ALTERNATOR HAS ALL OF THE CONNECTIONS AS YOUR OLD ONE!!!The instructions for Changing the alternator on a Galant V6 is WRONG in the Haynes auto manual. The dipstick is not in the way & neither is the bracket for the power steering pressure hose. My daughter's Galant has an aluminum bracket that has the electrical harness attached to it that is in the way.


How do you replace alternator on 97 cutlass 3.1?

Disconnect the battery negative. Loosen the belt and remove it from the alternator pulley. Disconnect all wires from the alternator. Unbolt the alternator from the bracket. Remove the alternator.


Is there a trick to removing the alternator bracket from a 1995 Jetta?

You should be able to remove the alternator bracket, on your 1995 Jetta, by removing the three retaining bolts. The bracket should easily come off.