Take the 2 bolts out of the back. After the 2 bolts are out hit the broken cylinder with a hammer to shake it loose, then pry it off with a sturdy screwdriver.
Remove the brake line with a flare nut wrench and the bleeder bolt. The bolts attaching the wheel cylinder to the backing plate are also on the back. I think this year model requires a female Torx bit, which if you don't have in your toolbox, you can get a set of three or four assorted sizes at an auto parts store or Sears. Unhook the brake return springs and move the tops of the brake shoes aside, but otherwise leave the hardware intact unless changing shoes or other parts.
That car was offered with a 4 and 6 cylinder engine.
Pull the old fuse out and put the replacement fuse in.
To remove the steering wheel from your 1985 Chevy Celebrity: First remove the horn button. There should be a keeper at the tip of the steering shaft, remove it. Remove the nut that holds the wheel in place. Use a steering wheel puller to actually remove the steering wheel.
To remove the front speakers from a Chevy Celebrity: 1. Take out the screws from the speaker grills, take the grills out. 2. The speaker is held in with screws, remove them. Lift the speakers out of the dash and unplug the wire harness.
To remove the glove box on a Chevy Celebrity pull the glove box out, then push up on the tab on the underside of the box to release the latch that keeps the globe box in. It will then simply pull the rest of the way out.
If I had to replace a fuel line I would get a replacement out of a car in a wrecking yard and install that.
no The Chevy Celebrity 4 cylinder engine doesn't use a timing belt, it uses a timing gear. To replace the gear it is necessary to remove the camshaft from the engine as it is a press job. To remove the camshaft it is necessary to remove the engine from the car.
OK, you have a 1982 Chevy Celebrity. Do you have a question?
Yes, you have to remove the camshaft from the engine to replace the timing gear. The timing gear is pressed both on and off of the camshaft using an arbor or other suitable press. Since there is not room to remove the camshaft in the car the engine has to be out of the car.
Does your car have the 4 cylinder engine or the V6?
Yes there are Torx fasteners used in a Chevy Celebrity.
Please specify. Do you really want to remove the entire dashboard, or do you want to remove one or both of the two trim panels