Just got thru tearing mine up to see how to remove it. You must gently remove the center cap that has the shift pattern on it. It is held in place by compression fit only so gentle prying with something no harder than what is absolutely necessary to pry it up (strong fingernails?) must be used to keep from scarring it and/or the shifter grip. Once you have the center cap off the rest is easy, you will need a 15 MM deep well socket (or standrad socket with short extension) and ratchet, with it remove the retaining nut that was concealed under the center cap. After removing the retaining nut, simply firmly grip the shift handle and turn counter-clockwise and it should come right off. If you plan to replace the shifter knob with an after-market shift knob you will need to know that the threads are metric, 10 x 150.
how do you remove the doors from a 2004 jeep wrangler
remove access plate on floor around shifter, 4 bolts hold the shifter onto the trans.
The 2004 Jeep Wrangler has 16 valves.
The 2004 Jeep Wrangler is a gas-powered vehicle.
The 2004 Jeep Wrangler has a 5-speed manual.
The 2004 Jeep Wrangler has an inline 4 engine.
The maximum payload of the 2004 Jeep Wrangler is 800 lbs..
The 2004 Jeep Wrangler has a 42 degrees angle of approach.
The 2004 Jeep Wrangler is 12 ft. 11.4 in. (155.4 in.) long.
The 2004 Jeep Wrangler runs on regular unleaded.
The 2004 Jeep Wrangler has a 31.9 degrees angle of departure.
The 2004 Jeep Wrangler has a drag coefficient of .58 Cd.