How do you remove the soft top on a 2000 jeep wrangler sport?

Answer 1

I'm assuming you mean removing the entire soft top, as if you were replacing it. If so:

• Unzip all of the zippers, unclamp all of the clamps, fold down the soft top completely.
• Flip the top over the bar that attaches at the windshield, you'll find a bunch of screws in this bar; unscrew them and the soft top will be free.

If you are asking how to fold down the top, that's pretty easy too:

• Start by unclipping the clips above the windshield, but leave them in the holes.
• Then, remove or roll up the back window: unclip the bottom clips, unzip the zippers completely to remove, or only unzip the sides and roll it up, securing it with the elastic snaps mounted at the top of the rear window.
• Remove the side windows by un-velcroing and unzipping along the top, and sliding the clip out from underneath.
• Unclip the clips above the door frame.
• Then you can go back to the clips above the windshield and completely unclip them. Just guide the top back and let it fold on itself, tucking the excess in as you go.

These instructions are for the factory installed top; if a replacement top has been installed, it may be different.