0
How do you remove the spark plug wires on 2000 Chevrolet impala?
Wiki User
∙ 15y ago
I just got done doing my wifes 2003 Impala. I removed the brace which runs from the pass. side to the drivers side. did not have to remove the upper motor mounts. I had a heck of a time removing the spark plug wire,so I broke the old spark plug off by using a 3/8" extention with a crows foot attached [this let the crows foot to go back toward the head ]. I simplely broke the end of the spark plug off with the plug wire still in place, then I removed the plug from the cylinder head. The heat shield slides off the spark plug boot for easy removal of the top end of the spark plug.This saved me a lot of time. only took 45 min. to change the back 3 plugs. I learned this the hard way the first time around. Hope that this helps.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How do you change the spark plug wires on an impala ss?
Disconnect the battery, remove the spark plugs wires and boots and remove the spark plugs. Put in the spark plugs, replace the spark plug wires and boots, and connect the battery.
How do you change spark plugs in a 2000 Chevy Impala?
Remove the spark plug wires from your 2000 Chevy Impala spark plugs. Remove the spark plugs with a 5/8 deep well socket by turning the socket to the left. Reverse the process to install the new spark plugs.
How do you change spark plugs on 2006 Chevy Impala 3.5l?
Spark plugs and wires
Does a 2004 Chevrolet Cavalier have spark plug wires?
Not really. If you remove the center cover on the top of the engine you'll see that there are spark plug "boots" that fit down on the spark plugs.
How do you change spark plugs on a 1993 Chevrolet astro van?
Remove the spark plug wires from your 1993 Chevy Astro spark plugs. Remove the spark plugs with a 5/8 deep well socket, by turning the socket to the left. Reverse the process to install the new spark plugs.
How do you remove drivers electric seat from a 2006 Chevrolet Impala?
You need to remove the 4 or 8 bolts that hold the track to the floor. Then you can remove the seat. But you must unclip the wires for the motor first before removing it so you do not damage them.
What is causing your impala to misfire?
you may need a tune up. the wires or your spark plugs
How do you install spark plug wires in a 1996 Chevrolet Tahoe?
Nothing
Where is the distributor cap on a 1985 Chevrolet Impala located?
It is at the rear of the engine and has the plug wires coming out of it.
How do you change the rear spark plugs on a Chevy 3.1 liter engine?
You will need to remove the spark plug wires on your Chevrolet 3.1 liter engine. Remove the spark plugs with a 5/8 deep well socket. Turn the socket to the left. The spark plugs will come out. Reverse the process to install the new spark plugs.
How do you pull spark plug wires on 2001 Chevy Impala?
Give the spark plug boot a twist to free it from the spark plug then pull it off of the spark plug by the boot.
How do you change spark plug wires for a 94 caprice?
The spark plug wires on your 1994 Chevrolet Caprice are quite easy to change. The spark plug wires simply lift off on each end. Put the new spark plug wires on and push until you feel a click.
