The screws are either gonna be Phillips or torques head, so act accordingly. there should be to on the outside corner, and if you open the tailgate there should be two more in there. after removing all four the assembly will hinge open almost like a door.
There are 2 tab locks, 1 at the top and bottom of the assembly. On the bottom is a small hole for prying it open. GENTLY hold the tab back while prying the assembly open.
Scrape the sealant goop out of the grooves and fill the grooves with black or clear silicone. Position the back up light reflector and the foam gasket.
After that it snaps back together easy as pie.
how do I remove the water pump from my 1990 Isuzu truck?
frist remove turn signal/marker lights then remove grill from rad support.
In need to get shifter off to remove transmission
There are three plastic tabs at the bottom of the fancy covers, two on the front and one on the end below the odd looking slot with a tab poking through. You can sort of see the end one with a good light the two front are by feel.
it is a f250 1990 ford truck its a f150 1990 ford truck
Some bulbs can be changed by accessing them through the runk but I think your have got to remove the light assy and then remove the bulb.
1990 ford truck no spark
Located in the fuel tank - may have to remove if there is no exterior access
Behind the oil filter. I went in through the wheel well and had to remove the oil filter.
Remove the inside of the glove box and look in and down to the right and you will see it. It has a 100 wires going to it.
depending on model of truck.
1990 Ford 250 truck