Ok so it took some time to work out. The rear manual window winder is held on by a horseshoe wire sir clip. Its between the handle arm and the plastic washer that sits on the door covering. I used a flat blade screwdrive to push it out. The closed end of the clip can be seen on the end of the arm when the handle is pointing to 6 o'clock and you push the driver between the arm and washer. you can't release the clip from this side.
Turn the arm to 12 o'clock and use the screw driver to push down on the clip open end. Its a bit of a fiddle but can be done. To refit the handle push the clip onto the arm. check the arm position from the other door. press it on. It goes back on very easily.
hope this helps.
Use hammer.
On a mk1 I paid £70 which included fitting.
mel de polo de cambrio
take window adjuster case of...remove the nut, is there a special tool to remove the mirror unit. There is a thread on the new mirror which goes into the door
1. what is the problem of fiat punto front suspension 2. what is the mantinance of fiat punto front saspension
I'm afraid you cant remove the front head rests, very frustrating as I've brought new seat covers :o(
it is in the engine fuse box. number 26 is the passenger window fuse
Yes, a Fiat Punto has disc brakes at the front and these have pads. The drum brakes at the back have shoes.
Open panel in front of button for sunroof, there is a manual close inside the tool for closing is on the back of the panel you remove dont think you can without taking door trim off make sure fuse is ok then switch
30 front and back
Remove front grill for access. This is clipped in ,so with gentle persuasion you should have no problem. Horn is up approx centre behind grill.
The washer tank may be empty, or the pump not working.