Knock pins out holding the caliper in place. Pull caliper off of rotor. Remove old pads from inside of caliper. Sometimes, the back pad will still be sitting against the back of the rotor. Replace front pad back in the same grooves on the caliper.
Jack up the front wheel you intend to work on, and remove the tire. There are two bolts that hold the brake caliper on, (located on the back side.) Remove these and the caliper will pull of the disc....
First jack the vehicle and place jack stands under it securely. Then remove your front wheels and then use a 8 or 10mm socket to release the brake fluid pressure in the line from the little bleed...
Unbolt calipers from bracket, suspend with wire hanger so you don't stretch out or damage brake line. unclip & remove old pads. Install the same way. You have to separate the pads with some...