Remove the taillight assembly to gain access to the bulbs
unscrew it and screw in the new bulb
Open the tailgate.Remove the taillight bolts, pull taillight toward you to release two clips.Unplug the taillight connecter.Connect the taillight connecter.Install the pushing away from you to fasten the two clips.Install the taillight boltsClose the tailgate.
Taillight bulb replacment/Taillight housing replacement * Remove the rear inside trunk finishing panel to access the taillight housing mounting nuts * Free the grommet for the taillight electrical harness and the three taillight housing nuts then pull off the taillight housing * Rotate the bulb socket counterclockwise and pull it out of the taillight housing * To remove the bulb from the socket pull it straight out.To install a new bulb in the socket push it straight into the socket until it stops
* Remove the rear inside trunk finishing panel to access the taillight housing mounting nuts * Free the grommet for the taillight electrical harness and the three taillight housing nuts then pull off the taillight housing * Rotate the bulb socket counterclockwise and pull it out of the taillight housing * To remove the bulb from the socket pull it straight out.To install a new bulb in the socket push it straight into the socket until it stops
You can access the bulb from the trunk area (from behind). Just remove and replace, should be straightforward.
Release the two tabs you can't find!
To replace a taillight on a 1996 Honda Civic prop open the trunk. Remove the twilight mounting hardware. Push the light outward. The unit should come off in one piece. Replace the taillight with a unit that fits.
The light bulb or the taillight lens? Open the trunk to replace the bulb.
rear you use a torx driver to remove taillight assembly screws. them replace bulb.
To replace a side marker bulb on a Honda CR-V, open the hood and remove the small screw on the back of the bulb. Pull the bulb forward and it will come out easily. Replace the bulb.
* Remove the rear inside trunk finishing panel to access the taillight housing mounting nuts * Free the grommet for the taillight electrical harness and the three taillight housing nuts then pull off the taillight housing * Rotate the bulb socket counterclockwise and pull it out of the taillight housing * To remove the bulb from the socket pull it straight out.To install a new bulb in the socket push it straight into the socket until it stops