You need to take off the large rectangular plastic fascia on the inside part of the tail - it's not bolted, it just uses the plastic grommets so you can use a screwdriver to pry enough out to work it by hand.
Once you have the cover off, take out the 2 large screws on the right hand side. These hold the license plate mount in. Once the screws are out, you can use a rubber mallet or by hand (it requires not only force but finesse - I broke the right grommet).
Take the mallet, or your hand(s), and apply force to the top of the license plate mount (the thing that holds the entire bulb assembly and what the license plate cover itself screws into).
By applying force you make the grommet pop out of the brackets, and can then take the entire assembly off the tail. Just make sure you have a table or something to put the whole thing on as there is a wire going through the tail to the bulb unit. I was trying to troubleshoot where there is a 10AMP wire in the tail and it lead to me taking the whole license plate and light bulb cover off.
to replace dome light in suzuki grand vitara
How do you replace a transmission filter for a suzuki aerio SX 2006 ?Read more: How_do_you_replace_a_transmission_filter_for_a_suzuki_aerio
replace thermostat suzuki gran vitara 2000
To drive a Suzuki raider 150 you must be possession of driving skills and a valid driving license.
To drive a Suzuki raider 150 you must be possession of driving skills and a valid driving license.
You replace.
you bring it to a shop
how to un hook
This is the first time for me to work on a Suzuki and I can't seem to get the head off to replace the gasket or to see if the head is cracked is there a trick to removing the head on a 2001 Suzuki esteem 1.8 with dual overhead cam
When do you replace the timing chain on a 2005 Suzuki Grand Vitara?
Behind the grille
You will have to replace the compressor unit. You should b e able to find non/Suzuki unit for about $500. Dealer price: $1,700 parts and labor.