Blower Motor Removal & Installation With Air Conditioning 1. Disconnect the battery ground. > On trucks built for sale in California, remove the emission module located in front of the blower. 2. Disconnect the blower motor wiring at the blower. 3. Disconnect the cooling tube at the blower. 4. Remove the 4 mounting screws and pull the motor from the housing. To Install 5. Remove the clamp from the blower case and remove the blower cage. Mount the cage on the replacement motor. 6. Install the blower motor and tighten the 4 mounting screws. 7. Connect the cooling tube and wiring hardness. 8. Connect the negative battery cable. Check the blower motor for proper operation. 9. Cement the cooling tube on the nipple at the housing using Liquid Butyl Sealer D9AZ-19554-A, or equivalent.
where is the blower motor on a 2001 chevy blazer
Location of blower fan on 2001 blazer
search up the diagram
The bearings are out of it. Replace Blower motor.
Check to see if you are getting power to blower motor - if so replace blower motor If not check fuse, switch, resistor pack.
To replace a blower motor on the resistor first you take off the nozzle and then you go into the motor through the nozzle and unlock it then repeat and oil and done.
The resister for the 2001 prism blower motor drops voltage to the blower motor. This is how the blower motor runs at a lower speed.
replace the blower motor resistor
You need to replace blower motor resistor.
you have waisted my time, thank you
Disconnect the battery and remove the glove box, lower finish panel and ECM. Disconnect the blower motor wire harness and the three mounting screws.. Remove the blower motor.....
Remove the wiring harness from the back of your 2001 Chevrolet Corvette blower motor. Remove the blower motor retaining bolts. Remove the blower motor fan. Reverse the process to install the new blower motor.