![]() |
How do you replace a blower resistor on a 2001 Ford Focus?In: Ford Focus |
[Edit] |
Answer
sorry the pic didn't come out...
It's easier than it looks on paper. I removed and replaced it in <5 minutes. My resistor pack is bright Ford blue.
You will need: A. The new resistor pack. B. An 8mm socket and suitable handle (one of those flexible ones did the trick). C. A flashlight. D. Opposable thumbs (should be standard issue on the higher primates).
Step by step: 1. Open the glovebox, and empty it. 2. Squeeze the sides of the glovebox and drop it down. 3. Squeeze the tab on the connector to the resistor pack (hidden in the pic below, it's on the left). 4. Remove the 8mm hex-head screw holding the resistor pack. Once loosened, it can be unscrewed by hand (don't drop the screw!). 5. Lift the resistor pack from the bottom, it swings up and out.
Installation is the reverse of removal. Don't overtighten that screw!
Let us know if this fixes your Focus!
First answer by ID412303467. Last edit by ID412303467. Question popularity: 77 [recommend question]
|
Research your answer: |
- Reverse switch ford focus?
- Why does your 2002 ford focus 2.0L suddenly die when driving almost like overheating but then comes back after cooling for an hour?
- Can u replace an instrument cluster without a tach on a 2000 ford focus with another instrument cluster form another focus with a tach?
- Change tail light on 2005 ford focus sedan?




