Answers.com > Wiki Answers > Categories > Cars & Vehicles > Asian Cars > Toyota > Toyota Camry > How do you replace a ignition key cylinder on a 1998 Toyota Camry?

How do you replace a ignition key cylinder on a 1998 Toyota Camry?

In: Toyota Camry, Toyota Corolla [Edit categories]

Answer:

You need to disconnect the battery, after that remove plastic and metal cover underneath the steering wheel. After that you get access to the key cylinder, disconnect the harness, remove nuts. Install a new key cylinder, tighten the nuts, connect the harness to. Install the plastic and metal cover. Connect the battery.

You might want to try the cylinder before installing plastic cover.

First answer by Archangel dmitry. Last edit by Archangel dmitry. Contributor trust: 473 [recommend contributor ]. Question popularity: 1 [recommend question].

[report abuse]

Can you answer these Toyota Camry questions?

	Is seal married?	Answer it!
	How CNG conversion kit works?	Answer it!
	Is a Toyota Camry a spark ignition car?	Answer it!

Relevant answers:

Ignition key cylinder Toyota?
hi; had the ignition key cylinder replace June 9,08 on a 1995 corolla. i could turn the key half way for the radio to come on; but could not turn all the way to start the car. i found out that you...
How do you replace a lost ignition key for a 1996 Toyota Camry?
2-ways #1 first go to dealer with vehicle registration and I.D., name must be the same as on registration. They will give you the key code take it to locksmith, it should cost around $20.00or#2...
How do you replace the ignition lock cylinder in a 2001 Toyota Camry?
You need to remove the panel located underneath the steering wheel. There are basically two panels one on top of each other. The first one is plastic and it's attached with plastic holders (easy to...
How do you change the ignition lock cylinder for a Toyota Camry 1998?
You have to remove the plastic cover underneath of the steering wheel, after that the metal shield behind the plastic cover. When you remove the shield you will get access to the ignition lock...
How do you replace an ignition key cylinder on a 1995 Toyota Camry?
Start by removing the lower cowl shield from the steering column. (this is done by turning the steering wheel about 45 degrees left and right and removing the exposed screws) Then turn the key to the...