How do you replace a serpentine belt on a 1995 Maxima?

Answer 1

You have to loosen the bolt on the top of the engine under the a/c line. It�s a 14mm bolt and you need a long extension to get to it. Then I suggest jacking up the car to get under it and the middle is a tension pulley and you have to loosen that and it also is a 14mm I think. A long box wrench works the best to get it loose. Then you can take the belt off. I am not sure how to do the Power Steering belt that is what I was looking for help with. To change the power steering belt 1st you need to have the A/C, alternator belt off as described above. I recommend removing the passenger front tire and safely block the car up. To the left of the power steering pump is a long bolt running up and down with the head on the bottom of the bolt. Up toward the top is a small bolt that needs to be lossened. I believe it is a 12 mm head. Once that is loosened then turn the bolt head that is on the bottom of the long bolt counter(also 12mm) clockwise till it pulls the P/S pump upward and loosens the belt. Replace the belt and reverse the procedure to tighten the new belt up.