Confirm that a routing diagram exists near water pump or RH strut tower or draw one.
Use a 3/8" ratchet or 13mm open-end wrench to releive belt tension and remove the belt.
Route the new belt correctly around all pulleys except water pump or Alternator (your choice.)
While holding the tensioner in the slack position, put the belt arount the last pulley.
Confirm routing and seating of belt.
Start engine.
Reconfirm routing and seating of belt.
I need a diagram of 2003 ford crown victoria serpentine belt.
The serpentine belt on a 2003 Dodge Dakota is replaced by loosening the belt tensioner and slipping the belt off. It can then be removed from the engine accessories and a new belt installed.
In order to change the serpentine belt for a 2002 Oldsmobile Alero, you must obtain a copy of the serpentine belt routing diagram from the manufacturer. Follow the routing diagram. Use a serpentine belt tool for loosening the tensioner. In order to position the belt, use a belt placement tool.
Replace serpentine belt on Chevy avalanche?HOW
How do you replace the serpentine belt in 1997 sunfire
The diagram is under the hood. Pull tentioner to release tention remove belt/ replace
My serpentine belt slipped off. I have a 2003 Hyundai sonata. I need instructions on how to put it back on.
you do not adjust tension on a serpentine belt the tension is automatcally adjusted if the belt is loose, replace the belt SOME TIMES THE TENSIONER CAN BE WEEK ALSO.
routing for serpentine belt 2003 mercury sable
Whats the easiest way to change my serpentine belt on my 2003 Toyota celica gt.I need a diagram
First you take the old belt off, and then you put the new belt on!!
Use a breaker bar in the belt tensioner to relax tension and then remove/replace belt