Answers.com > Wiki Answers > Categories > Cars & Vehicles > American Cars > Jeep > Jeep Cherokee > How do you replace an idler pulley on a 1991 Jeep Cherokee 6-cylinder automatic?

How do you replace an idler pulley on a 1991 Jeep Cherokee 6-cylinder automatic?

In: Jeep Cherokee [Edit categories]

Answer:

Answer

Try to replace only bearing #6203 2Z inside of pulley.

First answer by ID0973818541. Last edit by ID0973818541. Question popularity: 60 [recommend question].

[report abuse]

	How many rotors on jeep Cherokee?	Answer it!
	Can you see a picture of the transmission with the neutral safety switch?	Answer it!
	What is the purpose of the alternator?	Answer it!
	Are jeep Cherokee steering boxes universal?	Answer it!
	When does the speedometer turn over on jeep Cherokee?	Answer it!

How do you replace idler pulley on 1996 Jeep Grand Cherokee?
The idler pulley is located just under the A/C compressor. There is a bolts in the middle of the pulley that needs to be removed and the idler pulley can be removed. Sometimes these bolts stick and...
Is the 1992 Jeep Cherokee compatible with the 1991 Jeep Cherokee?
all except for the engine itself. i have a 91 Cherokee with a 92 motor... there are maybe 1 or 2 wires from the harness that don't go to anything at all! they don't affect anything except to cause a...
Where is the neutral safety switch on a 1991 Jeep Cherokee automatic?
neutral safety switch is on the left side of transmission
Can you replace the bearing in the idler pulley on a 94 Jeep Grand Cherokee?
You can, for about 10% of the price of a new pulley, but you need a bearing press or hydraulic press to do it properly. A new metal pulley usually costs around $30, but the bearing can be obtained...
How do you replace the heater core in a 1991 Jeep Cherokee?
Its a tough job. You have to remove the dash panel, including the steering wheel and steering column and then remove the plenum box which involve evacuating the refrigerant system and draining the...