It is located behind the large crankshaft/harmonic dampner or pully on the belt drive end of the engine. You have to find it, maybe clean the area of dirt and grease, then see if you have access to the mounting screw. If not you have to remove the pully.
where is the crank sensor located on a 2005 chevy impala
install 3.8 Chevy impala crank sensor passenger side , remove wheel and use pully to pull out crank shaft
how do you replace wiper crank arm 2001 chevrolet impala?
where is the crank shaft pistion sensor located on a 2002 Chevy Malibu, and how hard is it to replace
Chevy did not use a crank sensor on that year.
A crank sensor was not USED on a 1995 model.
That year model does not have a crank sensor.
Where is the crank sensor on a 95 chevy lumina car ?
It is inside the distributor and is more commonly known as a distributor pickup, HEI pickup, pickup coil, hall switch, or hall effect sensor. I hope that helps.
I HAVE A 2000 IMPALA LS. I HAD THIS PROBLEM ABOUT A YEAR AGO AND I HAD TO HAVE THE CRANK AND MODULE SENSORS REPLACED. THE PRICE OF THE CRANK SENSOR IS ABOUT $60 BUT I'M NOT SURE ABOUT THE MODULE SENSOR. IN ALL,INCLUDING THE LABOR,I WAS OUT OF ABOUT $180-$200. Crankshaft sensor is the culprit; I had the exact problem.
They did not use a crank sensor in 1984, There was no need for 1
you can check your fuel pressure! check the timing, maybe even your crankshaft and or camshaft sensor. maybe weak fuel pump