Want this question answered?
Front
how do you replace the front rotors on Toyota Land Cruiser
70
Lift the car, remove the tire, remove the brake shoe/caliper and remove the old brake pad. Next, put in the new brake pad, replace the brake shoe/caliper, replace the tire and lower the car.
Its time to replace it.
To replace brake pads and rotor: Unbolt wheel, unbolt caliper, remove caliper, unbolt caliper bracket, remove rotor, replace rotor, bolt up bracket, compress caliper, replace pads, replace caliper, bolt up caliper, bolt up wheel, repeat whole thing on other side...
Knock pins out holding the caliper in place. Pull caliper off of rotor. Remove old pads from inside of caliper. Sometimes, the back pad will still be sitting against the back of the rotor. Replace front pad back in the same grooves on the caliper.
how to replace a exterior front door handle on a 1999 toyota tacoma
The 2003 Toyota airbag sensors can be found behind the front bumper and inside of each door. There is a total of seven airbag sensors.
Front brakes or back> front is really simple, when you take the caliper off, the caliper is held on with 2 1/2 bolts... the rotor will come off if your going to replace that to, it will slide off the spindels when the caliper is removed... put the new pads in place and slide the caliper back on and put the 2 bolts back in to hold the caliper in place.
Jack up the 2002 Optima and remove the wheel. disconnect the caliper brake line and drain into a bucket. Unbolt the caliper, and remove it with the pads. Bolt the new caliper on and replace the pads. The brakes may be spongy and the new caliper will require bleeding.
Remove caliper and pull rotor off the hub. Push new one on, replace caliper and pads.