Answer:
can you be a little more specific ? if its the motor, then you need to remove the door panel. look for screws that are hidden under the door pull , you will have to pry the door panel out once you get all the fasteners from the door panel out. to replace the motor you will have to take out the motor and regulator assembly as one unit, be careful not to break the glass when removing screws or in stalling them on glass, it is a good idea to remember all the steps when removing, when removing or installing motor too regulator make sure you do not let the cable get loose cause you may never able to put it back together. good luck in your endeavours.
cheers
hami1