Note:The drivebelt routing decal on the radiator shroud to help during drivebelt install * To replace the belt rotate the tensioner pulley clockwise to release belt tension * Remove the belt from the auxiliary components and slowly release the tensioner * Route the new belt over the various pulleys again rotating the tensioner to allow the belt to be installed then release the belt tensioner
Replace serpentine belt on Chevy avalanche?HOW
Remove serpentine belt. Remove alternator. The bolts that hold the tensioner on are under the alternator.
How to remove and install the serpentine belt on 1991 Chevy Blazer with AC?
Providing your cavalier has a 2.2l, this is what your looking at.
I think it has a serpentine belt,at least mine does You can put a 15mm wrench on the tensioner and pull it toward you, the belt will slide right off.
This diagram is under the hood. Look for it
If it is a serpentine belt you replace the tensioner pulley
Loosen the tensioner pulley on your 2001 Chevy Impala. The serpentine belt will become loose. Take the old belt off and put the new belt on. Tighten the new serpentine belt with the tensioner pulley.
How do you replace timing chain & water pump on a2001 Chevrolet cavalier
GOOYEAR BELTS HAVE A DIAGRAM ON THE BACK OF THERE PACKAGE Sometimes these diagrams can also be found under the hood of your car. In my 1990 cavalier this sticker was located in the area where the serpentine belt goes on.
if it is a belt squeal, check and replace the serpentine belt and or the tensioner.
the 3.1 liter v6 and the 4 cylinder both have sepentine belts