It would be best to unbolt and remove the front seat, then disconnect the cable at the transmission and at the columm, pull up the floor pad and pull the cable thru the opening in the floor. Reverse for installation.
You connect your floor shifter to your transfer case in a 4x4 Chevy truck 1993 by getting under the truck and looking for the rod that comes from the shifter to the transfer case. Then, use the pin connector to connect the rod.
Look under your truck and check the shifter linkages.1. Gearshift Linkage/Cable Mis-adjusted/Damaged- Repair or replace linkage parts as needed.
how long does it take to replace a carburetor on a chevy truck?
If you look at the drivers side of the transmission where the shifter cable hooks to it you will see an electric switch behind the cable where it hooks to the transmission. That is it.
replace heater core in a 1991 Chevy work truck 1500
Speedometer cable replace 1989 toyota
NO. It has a cable.
Yes there the same.
Where is the fusible link in a 2005 Chevy HD truck
how do replace a power steering hose on a Chevy c-1500 pickup truck
The transmission oil pan needs to be dropped, then you can disconnect the detent cable, remove the small bolt holding the sheath to the outside of the transmission then slide it out of the transmission. Be sure the o-ring is in good condition or just replace it when installing the cable back in.
How do you replace the front drivers seat on a 1996 Chevy S10 pick up truck