If it is the same as a 1993 Ford Ranger. You will need a large adjustable wrench for the belt tensioner and a sized wrench to take off the three bolts of the actuator. Disconnect the battery wires at the battery, no need to try and shock you. Use the large wrench to pull back the self adjusting belt tensioner arm holding the main belt. The arm is on a spring and just needs to be moved to release the tension on the belt so you can take the belt off the alternator. Take out the three bolts holding the alternator in. Remove the wire harness and ground going to the alternator and exchange with new alternator. Repeat instructions in reverse to put the new alternator back in.
How to replace a clutch interlock switch on a 1997 Ford Ranger XLT
The Ford Ranger alternator bolt torque specification is dependent upon the year of the Ford Ranger. In general, the alternator bolt torque specification is 45 pounds.
Take it to a repair shop.
No
Which ranger do you have because normally you take the air housing off then the serpentine belt then the mounting bolts on the alternator then remove the electric connection. If your trying to locate the alternator it's on the left side of the engine above the tensioner
Remove the neg battery cable, then the belt.Then the wiring and mounting bolts,
how to replace water pump on 2001 ford ranger
how to replace u-joints on 1995 ford ranger 2wd
The 1997 Ford Ranger engines are fuel injected , so no carburetor
How to replace alternator on a 2003, Ford F-350, 6.0 ltr.
In the alternator. Have to replace the Alternator.
Remove your idler pulley first. it is the pulley right next to the alternator.