In order to replace the drive belt on a 42 inch cut Murray riding lawn motor, first remove the blade after disconnecting the spark plug. The drive belt is now exposed for easy replacement.
no
To replace a drive cable on a Troy Bilt self propelled lawnmower, first make sure that the lawnmower is turned off. Then, locate the drive cable and remove it according to manufacturer instructions.
Before working on the Toro model 20017 lawnmower, disconnect the spark plug. The drive belt is visible under the mover. Use a ratchet to remove the blade. The drive belt is now accessible and can be easily changed.
remove the drive pulley, slip the belt on, then down through the frame onto the idlers that the pedal controls... done..
A representative copy of a parts manual is linked below.
You can change the drive belt, on your lawnmower, by loosening the tensioner pulley. With the tensioner pulley, loosen the drive belt will come off and can be replaced.
Previous years it has been the drive train belt that would break and then the mower would start but not move. Now my son says it is the hydro state that is the problem and it is too expensive to fix. Has anyone else had this problem?
Drive shaft is vertical- like a lawnmower. Cylinder is horizontal.
At a Briggs and stratton dealer.
Yes, it is a vehicle and as long as it does above 10 mph , you should be fine.Another View: A standard sized riding lawnmower is NOT considered a "vehicle," it is a "self-powered lawn implement" and may not be legally operated on the public roadway as a method of transportation from point to point.
We will need some more details... Is it the drive belt or the belt for the blades?it is the drive belt for Murray lawn mower model 38618x92a
no they drive them