1: Remove plastic cover over headlight, 2:Pull or pry up the two tabs that secure lamp assy to car, 3: pull entire lamp assy forward, 4: Remove bulb retainer ring by twisting, 5: Remove bulb. Replace everything in reverse order.
1999 3.1L model. On each side there is a flat shroud roughly 9 inches long held in place by one screw with a rather large washer. Remove this screw and turn the shroud out of the way. Beneath you...
Just did this on a friends car. Here's how I did it. Under the hood, I removed the bolt in the center of the plastic shroud. I then carefully pried up the plastic tabs about halfway (one on the left...
The bulbs screw in from the rear. If you can't get to the back, take the light assy off of the car.when you open the hood of the car there are two square plastic tabs on either side of the light,...
The bulbs screw in from the rear. If you can't get to it take the light assy off.
---------
This update is not for the obnoxious drivers burnt out their high beams by tailing a Prius and...