Safely raise and support the rear of the vehicle. Remove the center nut (22mm or 24mm - not sure). Remove the Phillips drum retaining screws. Remove the drum. Remove the hand brake mechanism springs...
Remove wheel, remove cotter pin at bottom of tie rod, remove castle nut. Separate tie rod from spindle. Unscrew tie rod, Screw in new one, seat in spindle, install castle nut, install cotter pin,...
On my 94 ... swing up and open the back tailgate. There are two hex head bolts in the black plastic part of the tail light lens at the top. If I remember they require an 8mm socket or nut driver....
I got mine at junk yard $5.00. Rear panel comes off.2 bolts hold in motor.There is a small clip where the arm bends that comes off.You can see where to plug it in.Easier to show how done than explain.
You replace the rear wheel bearings for a 1997 plymouth breeze by taking it to a very skilled mechanic and just waiting it out. If you want to do it yourself I can't help you with that.