i'am replacing a serpentine belt on a air condition compressor. i would like some diapham or step instructions would work the best thank you roger
belt assembly for a 95 Plymouth voyager
It can cost between $14 and $30 to replace a serpentine belt on a car. The price can raise to $40 or $60 if a person has it done at a car shop.
serpentine belt.
serpentine belt rought 2001 Saab 9.5
If it
is it hard to replace a waterpump out of a oldsmobile aurora 95
Use a socket and ratchet and place on the 95 Deville's belt tensioner pulley. Pull to the side to release tension on the belt. Remove the belt and replace it, then lower the pulley back into place.
Use a socket and ratchet on the bolt that holds the 95 Park Ave serpentine pulley. Pull the ratchet to the side and the pulley will swivel, loosening tension on the belt. Remove the belt, install the new belt in the same manner.
Take a 14 mm wrench and put on the center bold of the tensioner. Then pull back releasing pressure on the belt. Remove and replace. Take a 14 mm wrench and put on the center bold of the tensioner. Then pull back releasing pressure on the belt. Remove and replace.
On vehicles with a single serpentine belt, tension is usually self-adjusted automatically via a spring loaded tensioner. No additional adjustment is necessary. If the belt is slipping or loose, then it needs replacing. Also check the tensioner bearings and replace the tensioner if necessary.
I have a 95 GC Laredo and the routing diagram for the serpentine belt is on the fan shroud. Perhaps yours is there as well?
yes you can