It is quite simple. Disconnect the battery first. On the starter there is one wire that you need to disconnect. Remove the two bolts holding the starter and pull it forward (towards the front of the vehicle) and out. Reverse for installation.
First, there is no such thing as an 86 dynasty, the first model year was 88. As far as replacing the starter, you will have the easiest access from underneath the car. Remove all wires and bolts...
Remove negative battery cable.For easier excess to starter,take front passenger tire off,starter is next to oil filter,you can see it good when tire is removed,remove ignition wire connected to...
Remove fan shroud, radiator, fan clutch and fan blades. Then the water pump bolts will be accessible. You can avoid removing the plate that goes across to the P.S. pump, but you do have to remove the...