Follow the upper rad hose from the radiator to the engine and you will find a housing thas has the thermostat. Take the housing off and when you reinstall the thermsotat, make sure the spring is toward the engine.
On almost all cars, the thermostat housing is right where the top radiator hose meets the engine itself. Drain 50% of the coolant,remove the housing bolts, remove the thermostat (note how it is...
1. Turn off car (cut power to lights) (wait for bulb to cool if necessary) 2. Open hood 3. There is a black rectangular 3 wire cable leading into a rubber ring of the headlight, press firmly on both...
The thermostat is located in the cooling neck located at the end of the cylinder head next to the distributor. Instructions: Drain coolant, remove both bolts to thermostat housing (one bolt may not...
drian raidiator, disconnect airintake sensors, remove intake, follow upper radiator hose to the Thermostat housing, remove 2 bolts, hose should move enough to get new thermostat in, install new...
find the thermostat housing, it has a radiator hose connected to it and mine also has a sensor.take the 2 bolts out of the housing pop it off then take a scraper and scrape the old gasket off, be...