How do you replace the waterpump seals on a 1988 rm 80?
[Edit]

Water pump seals

If it is the seal between the cover and the engine, drain the coolant, remove the hose from the housing on the engine cover, remove the screws/ bolts, scrape the old gasket, dry the area, apply rtv sealant to a new gasket and reassemble. If it is an o-ring leak, remove as specified, install new rings, and reinstall. If the pump is leaking, or the bearing is substantially worn, replace, and reassenble.

Improve Answer Discuss the question "How do you replace the waterpump seals on a 1988 rm 80?" Watch Question

First answer by Little t85. Last edit by Little t85. Contributor trust: 44 [recommend contributor]. Question popularity: 22 [recommend question]

Research your answer:

Answers.com > Wiki Answers > Categories > Cars and Vehicles > Motorcycles > Motorcycle and ATV Maintenance > Suzuki Motorcycles > How do you replace the waterpump seals on a 1988 rm 80?

Our contributors said this page should be displayed for the questions below. (Where do these come from)
If any of these are not a genuine rephrasing of the question, please help out and edit these alternates.
How do you change a water pump on a 92 rm 80?