Want this question answered?
You can press the Delete or F2 key to get into bios and then you can reset the settings or you can reset CMOS. This guide shows you how to reset CMOS - http://www.eteknix.com/how-s/how-reset-cmos-122/
1*122=1222*122=2443*122=3664*122=4885*122=6106*122=7327*122=8548*122=9789*122=109810*122=1220...
122 = 122/1
The outside air temperature should still have the same reading. The installed sending unit should not affect the temperature gauge.
5% of 122= 5% * 122= 0.05 * 122= 6.1
40 percent off 122.00 = 73.240% off of 122= 40% discount applied to 122= 122 - (40% * 122)= 122 - (0.40 * 122)= 122 - 48.8= 73.2
21 % of 122: (21 / 100) * 122 = 0.21 * 122 = 25.62
12200%122= 122 * 100%= 12200%
122
That is 122 inches "in a line."
You need only a single '1' to write 122, but 122 of them to count to 122.
2010-122 = 1888