From http://hondaswap.com/ecus-electronics-tuning/reset-abs-how-61690/
assuming youre driving an 96 - 00 model heres the procedure
1.locate your cars ecu (the main ecu that cntrols the engine,usually on the pasenger side ) ,ON TOP OF THE ECU YOU SHULD FIND A BROWN AND BLACK FEMALE CONNECTOR JUST LYING THERE,usually it is covered with a green cap..This is your diagnostic port.
2.Next ,take a short piece of wire and bridge this female connector,ie.the brown wire must connect to the black vice versa..
3.turn on your ignition , don't start the car,,now youre abs light on the dash should start playing Morse Code,these codes explainn what the precise problem is eg.1long flash 1 quick flash = disconected or failed fr wheel speed sensor.
4. to reset the abs ecu turn ignition off ,STEP 2 depress brake pedal,turn ignition on STEP 3,the abs light will go off after about 2 seconds. STEP 4 .after the light goes off release the pedal,the light will then come on after about 4 seconds. STEP 5 when the light comes on press the pedal again STEP.6 the light will go off again,the relase pedal.
the light will now blink a number of times to confirm the code has been erased
SOUNDS COMPLEX BUT THE PRESSING AND RELASING BECOMES INTUITIVE AFTER THE SECOND TRY
This will work asuming u drive a similair model to mine,let me know how it goes
Repair the problem and it will reset.
The ABS light indicates something is wrong with the Automatic Braking System. It can be reset by fixing the brake system.
Have the ABS repaired by a professional. They will reset the light. Resetting the light without repairing the problem will do no good. The light will just come back on.
Your problem is not the warning light. The light is on because there is a problem with the Anti-Lock Brake System (ABS). Have it repaired and they will reset the light.
why the abs light come on and how rest
Bring to a shop that has an ABS scanner to determine the problem
get your brakes fixed....
No, if the light is on all the time there is a problem with the ABS system. Have this looked into by a professional.
Bring to a shop that has an ABS scanner to determine the problem
The ABS light is on because there is a problem with the ABS system. Until the problem is fixed the ABS light will remain on and the ABS system will not function if needed. Once the problem is repaired, the ABS light will reset itself.
there is a problem in your breaking system,, most likely your abs pump. have it checked out.
Just put a piece of black tape over the light if it bothers you and you do not want to have the ABS repaired.