TURN IGNITION KEY TO ON POSITION THEN BACK TO OFF 3 TIMES 3RD TIME LEAVE IT IN ON POSITON THEN DEPRESS GAS PETAL TO FLOOR 3 TIMES. TURN KEY OFF SHOULD BE RESET On my 2005 impala you turn the ignition on and turn the radio off. Push down the tune nob until settings is displayed on the radio. Push the seek button until you see oil life. Push the next button on the radio until you see the word reset then push the tune nob again. this will reset the oil timer on the car and change oil light should turn off.
With engine off. Turn key to on. Press accelerator fully three times. This should reset light.
how do I replace interior light bulbs in 2002 chevy impala. I removed the cover, but the bulb is cramped in and I can't pull it out.
Time to change your oil in your engine!
Use an OBD scan tool to reset or disconnect the battery
It means that the engine computer has detected a malfunction that will affect the emissions of the vehicle.
you just open the light and change it or pet boys
See How to Reset the Change Engine Oil Message on page 6-18 of your "Owner's Manual", under Section 6: Service and Appearance Care - Engine Oil...
Turn on the ignition but do not start the engine. Depress the accelerator to the floor 3 times within 5 seconds. The oil light should blink and then go out.jd
Check engine is an error. You have to go at a garage to see what is the error code, then correct the problem.
You need to connect a OBD-II Scanner to find out.....
How do you change a tag light on a 2002 impala
Hi i have an 2001 Chevy impala and my service traction Light is on. plus my safety brake is locked