Unhook your negative battery terminal, turn the headlight switch on and then off, wait about 15 minutes and hook the cable back up. Make sure you have re-inflated your tires. 33# is a good number. You should check the air pressure often, to keep from wearing them out too soon and for better mileage.
hi how do i reset tire pressure sensor light on
Adjust the tire pressure to specs then take it for a drive. It will reset itself if everything is okay. If you have a faulty sensor the light will remain on.
Adjust tire pressure to the proper specs on all tires and take it for a short drive. It will reset before you get down the street. If it doesn't reset you have a problem with one of the tire pressure sensors.
The check engine light on a 2002 Ford Focus can be reset by disconnecting the battery for 1 to 2 minutes. This resets the vehicle's computer and clears the light.
The exclamation light, on your Ford focus, is a reference to the oil needs to be changed. The light can be reset by changing the oil.
The best way to reset the ABS light on a Ford Focus is to take it to a mechanic. There are some people who have had success resetting the light by disconnecting the negative battery terminal for about 15 minutes while inflating the tires to 33 pounds of air pressure. Then, turn the headlights on and off and reconnect the battery terminal.
The easiest way to reset the 2008 Ford focus low tire pressure sensor is to remove the fuse. Keep the fuse out for 10 seconds and then replace it to the original slot.
There is no reset for the oil pressure light. If you have sufficient oil pressure it is off, if you have low oil pressure it is on. If it is on, STOP driving the car until you find out why it is on.
Inflate your tires to the proper pressure and then drive the vehicle
buy a chevy
Adjust tire pressure and drive it. The light should reset itself after a short drive unless the pressure sensor unit in one of the tires is bad.
Unhook your negative battery cable, turn your light switch on, then turn it off and reconnect the battery. That should reset the computer.