Put the driver's window down, lift the bonnet and ensure all equipment is switched off.
Ensure all doors are closed and remove key from the ignition.
Wait for 3 minutes, disconnect the vehicle battery and wait 15 seconds.
Reconnect the vehicle battery, wait a further 10 seconds (do not open doors.).
Switch on the side lights through the driver's window.
Switch on the ignition and check system's functionality.
Hold lock button on key down for 10 seconds.
Remove key open & close door test central locking system.
Start the engine and complete the system's check.
Failure to follow this procedure could result in incorrect operation of many BSI related items
It should say in your handbook.
You need a peugeot kit, that includes a new ECU. This then needs coding into the vehicles BSI, which can only be done by a dealer.
nightmare, you have to use a peugeot kit that gives an extra control unit, that then has to be programmed to the vehicles BSI.
Dealer only im afraid
where is the fuses for a peugeot 407
you need a key code, and even then it can only be coded by an authorised dealer
How do you replace peugeot 407 serprntine belt
central look doors
The BSI unit is the componant that the fuses are plugged into. It is in the glove box on the passenger side of the car.
Procedure to reprogram a lost keyfob for a Peugeot 407 sw 2007
when to chang timing belt on peugeot 407 hdi 1.6
not fused bsi controlled