There are a couple of ways to reset the timing belt light on a 2008 Toyota Hilux diesel. One way is to unplug the battery for up to five minutes and see if that will reset the light. If not, you can hold the trip meter button down and turn the key, but not start the vehicle. This will reset the light most of the time.
Como puedo borrar manualmente la luz del t-belt de una hylux 2008.
timing belt light hilux 1kd
To reset the fuel filter warning light off for the Toyota hilux one must replace the filter that switch the car on and off. They must also click the rest button.
how to reset toyota kdn165 timing light
see hpoc.co.uk for a post on this very question
The airbag light is on because the airbag module detects a problem with the system. Fix the problem and the light will go out by itself.
Pull the dashboard apart. Others you can simply reset the ignition module by a sequence, but this one you have to reset it manually on the inside.
You will first need to properly reset the light. If this does not reset the light, then you may have to manually press it.
First you need to go and change the oil. Then you will be able to hold in the button on your screen to get it changed.
How do you reset engine light on jeep liberty diesel
First you need to turn your ignition switch to the 'on' position. The You then need to connect the warning switch connector within 3 to 60 seconds.
The easiest way to reset the timing belt indicator lamp in your Toyota automobile is to remove the fuse for the indicator lamp. Keep the fuse out for approximately 30 seconds. Put the fuse back in and the indicator light should be off.
Give rhino a call on 0245774708